Полетный контроллер CUAV V5 Plus Autopilot With NEO V2 GPS

CuavV5+Neo
Нет в наличии
31500 руб.
Количество:

Категории: Flight controller

V5 + AutoPilot

The V5+ AutoPilot is an advanced autopilot for academic and commercial integrators. Designed by CUAV in collaboration with the PX4 team. Based on the Pixhawk FMUv5 open hardware design, a highly modular board using Pixhawk standard pinouts for its external interface, allowing for carrier board integration. Out of the box pre-installed with PX4 Open Source Autopilot, and fully supported by ArduPilot.

Quick Summary

  • Main FMU Processor: STM32F765
    • 32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
  • IO Processor: STM32F100
    • 32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
  • On-board sensors:
    • Accelerometer/Gyroscope: ICM-20689
    • Accelerometer/Gyroscope: BMI055
    • Magnetometer: IST8310
    • Barometer: MS5611
  • Interfaces:
    • 8-14 PWM outputs (6 from IO, 8 from FMU)
    • 3 dedicated PWM/Capture inputs on FMU
    • Dedicated R/C input for CPPM
    • Dedicated R/C input for PPM and S.Bus
    • analog / PWM RSSI input
    • S.Bus servo output
    • 5 general purpose serial ports
    • 4 I2C ports
    • 4 SPI buses
    • 2 CANBuses with serial ESC
    • Analog inputs for voltage / current of 2 batteries
  • Power System:
    • Power: 4.3~5.4V
    • USB Input: 4.75~5.25V
    • Servo Rail Input: 0~36V
  • Weight and Dimensions:
    • Weight: 90g
    • Dimensions: 85.5*42*33mm
  • Other Characteristics:
    • Operating temperature: -20 ~ 80°c(Measured value)
Наши партнеры
Яндекс.Метрика